S/FTP cable 4x2xAWG22, Category 8, 2 GHz, LSOH, Euroclass Dca - s1, d1, a1, 500 m on reels

P/N: KE2000HS22 (will be specified)
  • complies with the Construction Products Regulation (CPR) EU No. 305/2011 and reaction to fire requirements according to the harmonized standards EN 50575: 2014+A1: 2016
  • enables transmission of all high-speed protocols including 25GBASE-T and 40GBASE-T up to 30 m 
  • tested in bandwidth up to  2 GHz
  • each pair individually shielded with AL/PET foil, overall copper braid, halogen-free sheath
  • suitable for places with higher level of electromagnetic interference 

    Technical specification

    Min. bending radius - installation 68 mm
    Min. bending radius - operation 34 mm
    Max. tensile load 340 N (34 kg)
    Temperature range - installation 0 °C to +50 °C
    Temperature range - operation -20 °C to +60 °C
    Outer cable diameter 8,5 mm
    Copper conductor diameter AWG 22
    NVP 73%
    Reaction to fire Dca - s1, d1, a1
    Fire safety flame retardant, low smoke, zero halogen, non-corrosive

    Certificates and warranties

    This product is certified by GHMT international independent laboratories according to  ISO/IEC 11801-1:2017 (Ed. 1.0) for 2 connector channel 30 m.

    2019 © All rights reserverd.
    Have any question?
    Product was added
    Need an advice? Close
    1. Send
      Message has been sent.
    Ask a question Close
    1. Send
      Message has been sent.