Cat. 6 shielded components

  • Cat.6 shielded components allow for a 1 Gigabit/s transmission speed, guarantee transmission of all standardized protocols up to 1000BASE-T and ensure a bandwidth of 250 MHz. 
  • Cat.6 lost its significance when 10BASE-T was introduced in 2006. 
  • There is no protocol, which would effectively utilize Cat.6. 
  • A bandwidth of 250 MHz is insufficient for 10GBASE-T and in case of 1000BASE-T, it is only 32% that is used. This means 170 MHz of wasted bandwidth! 
  • In terms of maximum transmission speed Cat.6 and Cat.5E components are identical.
1 Gigabit
1 Gigabit
1 Gigabit/s transmission speed, transmission of all standardized protocols up to 1000BASE-T
Cat.6 tienene
Cat.6 tienene
meeting the requirements of performance category Cat.6
250 Mhz
250 Mhz
Tested in bandwidth up to 250 MHz
Surface box, Category 6, 2xRJ45/s, wall-mounted, keystones included
P/N: KE-SMB02-W + KEJ-C6-S-TL(2)
  • 2 keystone jacks included (KEJ-C6-S-TL)
  • straight entry
1 Gigabit
1 Gigabit
1 Gigabit/s transmission speed, transmission of all standardized protocols up to 1000BASE-T
Cat.6 tienene
Cat.6 tienene
meeting the requirements of performance category Cat.6
250 Mhz
250 Mhz
Tested in bandwidth up to 250 MHz
Surface box, Category 6, 6xRJ45/s, wall-mounted, keystones included
P/N: KE-SMB06-W + KEJ-C6-S-TL(6)
  • 6 keystone jacks included (KEJ-C6-S-TL)
  • can be used as consolidation point or mini patch panel
1 Gigabit
1 Gigabit
1 Gigabit/s transmission speed, transmission of all standardized protocols up to 1000BASE-T
Cat.6 tienene
Cat.6 tienene
meeting the requirements of performance category Cat.6
250 Mhz
250 Mhz
Tested in bandwidth up to 250 MHz
DIN rail keystone holder, Category 6, 1xRJ45/s, keystone included
P/N: HN-DIN-C6S
  • 1 keystone jack included (KEJ-C6-S-TL)  
  • designed for DIN rails in residential and industrial electric distribution (home networking and industrial Ethernet) 
1 Gigabit
1 Gigabit
1 Gigabit/s transmission speed, transmission of all standardized protocols up to 1000BASE-T
Cat.6 tienene
Cat.6 tienene
meeting the requirements of performance category Cat.6
250 Mhz
250 Mhz
Tested in bandwidth up to 250 MHz
Patch panel, Category 6, 24xRJ45/s, black, keystones included
P/N: KEP-C6-S-TL
  • 24 keystone jacks included (KEJ-C6-S-TL)  
  • designed for 19” cabinets  
1 Gigabit
1 Gigabit
1 Gigabit/s transmission speed, transmission of all standardized protocols up to 1000BASE-T
Cat.6 tienene
Cat.6 tienene
meeting the requirements of performance category Cat.6
250 Mhz
250 Mhz
Tested in bandwidth up to 250 MHz
HD
HD
allows you to install 48 ports in 1U
Patch panel KOMPAKT HD, Category 6, 24xRJ45/s, 0,5U
P/N: 606068
  • reaches a density of up to 48 ports in 1U
  • 110/LSA termination blocks  

10 Gigabit
10 Gigabit
10 Gigabit/s transmission speed, transmission of all standardized protocols including 10GBASE-T
Cat.6A
Cat.6A
meeting the requirements of performance category Cat.6A on a component level
550 MHz
550 MHz
Tested in bandwidth up to 550 MHz    
LSOH
LSOH
low smoke, halogen-free cable resistant to flame propagation, designed for areas with higher concentration of people and areas with important electronic devices
Eca
Eca

Reaction to fire class according to EN 50575: 2014

STP cable 4x2xAWG23, Category 6A, 550 MHz, LSOH, Euroclass Eca
P/N: KE550HS23/1E-Eca
  • each pair individually shielded with AL/PET foil, halogen-free sheath 
  • enables transmission of all high-speed protocols including 10GBASE-T 

1 Gigabit
1 Gigabit
1 Gigabit/s transmission speed, transmission of all standardized protocols up to 1000BASE-T
Cat.6 tienene
Cat.6 tienene
meeting the requirements of performance category Cat.6
250 Mhz
250 Mhz
Tested in bandwidth up to 250 MHz
LSOH
LSOH
low smoke, halogen-free cable resistant to flame propagation, designed for areas with higher concentration of people and areas with important electronic devices
Patch cable STP, Category 6, LSOH
Patch cable length 0,5 m
P/N: PC-C6-S-xxx
  • individually shielded pairs with stranded wires, halogen-free sheath  
  • connector RJ45 is compliant with IEC 60603-7 standard by its dimensions and transmission features 
Quote request
Quote request Close
Patch cable STP, Category 6, LSOH
Patch cable length Performance categories Shielding Sheath
P/N:PC-C6-S-005 0,5 m Category 6 Shielded LSOH
P/N:PC-C6-S-010 1 m Category 6 Shielded LSOH
P/N:PC-C6-S-015 1,5 m Category 6 Shielded LSOH
P/N:PC-C6-S-020 2 m Category 6 Shielded LSOH
P/N:PC-C6-S-030 3 m Category 6 Shielded LSOH
P/N:PC-C6-S-050 5 m Category 6 Shielded LSOH
Patch cable length Performance categories Shielding Sheath
P/N:PC-C6-S-005 0,5 m Category 6 Shielded LSOH item
P/N:PC-C6-S-010 1 m Category 6 Shielded LSOH item
P/N:PC-C6-S-015 1,5 m Category 6 Shielded LSOH item
P/N:PC-C6-S-020 2 m Category 6 Shielded LSOH item
P/N:PC-C6-S-030 3 m Category 6 Shielded LSOH item
P/N:PC-C6-S-050 5 m Category 6 Shielded LSOH item
10 Gigabit
10 Gigabit
10 Gigabit/s transmission speed, transmission of all standardized protocols including 10GBASE-T
Cat.6A / Class EA
Cat.6A / Class EA
meeting the requirements of performance category Cat.6A / Class EA
500 Mhz
500 Mhz
Tested in bandwidth up to 500 MHz
Toolless field termination RJ45/s connector for Cat.7A, Cat.7, Cat.6A, Cat.6, Cat.5E cables
P/N: KE-FT45-C6AS
  • direct termination on Cat.7A, Cat.7, Cat.6A, Cat.6, Cat.5E cables  
  • tool-free, fast and easy installation 
600 Mhz
600 Mhz
Tested in bandwidth up to 600 MHz
LSA connection module
P/N: KE-AD-C61S
  • designed for reconnecting damaged cables of Cat.7A, Cat.7, Cat.6A, Cat.6, Cat.5E cables or in case of necessity to extend the link
  • LSA terminals ensuring connection of cables 
10 Gigabit
10 Gigabit
10 Gigabit/s transmission speed, transmission of all standardized protocols including 10GBASE-T
Cat.6A
Cat.6A
meeting the requirements of performance category Cat.6A on a component level
550 MHz
550 MHz
Tested in bandwidth up to 550 MHz    
LSOH
LSOH
low smoke, halogen-free cable resistant to flame propagation, designed for areas with higher concentration of people and areas with important electronic devices
Dca
Dca
Reaction to fire class according to EN 50575: 2014
STP cable 4x2xAWG23, Category 6A, 550 MHz, LSOH, Euroclass Dca - s2, d1, a1
P/N: KE550HS23/1E-Dca
  • each pair individually shielded with AL/PET foil, halogen-free sheath 
  • enables transmission of all high-speed protocols including 10GBASE-T 

Results per page 12 24 48
Products
Component
Variant
Type
Height
Width
Depth
Capacity
Performance categories
Shielding
Patch cable length
Base dimensions
Color
Cable construction
Number of fibers
Number of ports
Splice protection length
Connector
Connectors
Sheath
Environment
Construction
Type
Number of ports
Over voltage protection
Inner height
Inner width
Width of frame bar
Cable length
Number of ventilators
Input (W)
Reaction to fire
Fibre lenght
Type of connectors
2019 © All rights reserverd.
Facebook
Have any question?
Product was added
Need an advice? Close
  1. Send
    Message has been sent.
Ask a question Close
  1. Send
    Message has been sent.